4 Transport, installation and commissioning
Transport
Page
4 - 8
MB-20-G/MB-200G-W_MB-LABmaster_MB-200 MOD_TP700
Operating Manual - V5.0 - 04/2018 - STD
4.1.7 Moving a LABmaster
CAUTION
Risk of injury
The centre of gravity shifts slightly out of centre towards the sidewall, where the ante-
chamber is mounted.
► Always lift the workstation at its centre of gravity.
► Use a forklift.
► Lift the glovebox up directly on the crossbars beneath the gas purifier housing.
► Protect the edges using wood blocks (see figure).
To Next Page
Loading...
