1 General information
About this operating manual
MB-20-G/MB-200G-W_MB-LABmaster_MB-200 MOD_TP700
Operating Manual - V5.0 - 04/2018 - STD
Page
1 - 9
1.9.7 Abbreviations
Abbreviation Full term / Explanation
BS Box purge
CDA Clean dry air
dp Double purification
H
2
Hydrogen in regeneration gas
HEPA High efficiency particle absorber
HMI Human machine interface
HVAC Heating, ventilation, air conditioning
LMF Solvent filter, optional
standard feature with activated carbon and manual valves
LMF
reg
Solvent filter
regenerative solvent filter with mol sieve and Siemens PLC-con-
trolled valves
LMF
auto
Optional solvent filter system:
MB-LMF 2/40 REG dp with an automatic, Siemens PLC-controlled
switch over between filters, triggered by an LMF analyser or a time
period. The regeneration of the exhausted filter is started automat-
ically after switch over to the regenerated filter.
MSDS Material safety data sheet
N
2
Nitrogen
O
2
Oxygen
P&ID Piping and instrumentation diagram
PLC Programmable logic controller
PPE Personal protective equipment
ppm Parts per million
RKM Reactor (the "R") with reactive agent (the "K") and a propriety ad-
sorbent (the "M")
SOP Standard operating procedure
sp Single purification
To Next Page
Loading...
