12 Maintenance
Annex
Page
12 - 22
MB-20-G/MB-200G-W_MB-LABmaster_MB-200 MOD_TP700
Operating Manual - V5.0 - 04/2018 - STD
Disposal of components
► Dispose of parts or components built of steel for reuse.
► Dispose of electrical parts correctly at the designated local collection points.
CAUTION
Risk of injury
Toxic material used in the process are dangerous for health and environment
► Wear personal protective equipment (PPE):
proper protective safety mask, protective gloves and safety goggles.
► Follow the instructions for handling and disposal of hazardous substances
► Observe relevant safety regulations as well as material safety data sheets (MSDS)
and additional advice provided by the supplier.
► If hazardous substances are accidentally released into the environment, then take ap-
propriate action immediately. If in doubt, inform the local authority about the incident
and ask for the proper action.
12.10 Annex
See also
2 Declaration about Decontamination.pdf [}12 - 23]
To Next Page
Loading...
