12 Maintenance
Returning components for service purposes
MB-20-G/MB-200G-W_MB-LABmaster_MB-200 MOD_TP700
Operating Manual - V5.0 - 04/2018 - STD
Page
12 - 21
NOTICE
Improper electrical leakage test
Damage of electrical filter and overvoltage protection devices
► Deactivate all electrical filters and frequency converters before a leak test is ex-
ecuted.
► Only skilled electricians are allowed to perform an electrical leak test.
Cyclical testing is due according to BGV A3 or in-house
regulation.
Document the test performed in your maintenance log.
12.8 Returning components for service purposes
Before parts can be sent back to MBRAUN:
► Fill in the “Declaration of Decontamination” (see Annex [}12 - 22]).
► Send the “Declaration of Decontamination” to MBRAUN.
► Wait for confirmation:
The MBRAUN Service will inform you if all parts are accepted.
► After receipt of confirmation, send the parts to MBRAUN.
12.9 Decommissioning
In case of a decommissioning a glovebox:
► Remove all residual inert gas from the box.
► Deliver all recoverable materials to the appropriate collection points for recycling and
reuse.
Parts of the gas purifier may be contaminated. In case of an improper disposal, there is a
risk of environmental, soil and groundwater pollution.
► Dispose of system components in accordance with locally applicable regulations.
► Dispose of used LMFs and RKMs as well as box filters at a hazardous waste deposit
and in accordance with locally applicable rules and laws.
Disposal of chemicals
► Mark bottles, which include chemicals, with warning signs and a label.
► Follow the instructions of the MSDS, the instructions of the manufacturer and all ap-
plicable safety rules.
MBRAUN takes no responsibility for any pollution of the environment and atmosphere
and the consequences.
To Next Page
Loading...
