MBRAUN LABmaster pro sp - Optional Antechamber Equipment; Customer-Specific Components; Equipment from Other Manufactures

10 Additional equipment
Customer-specific components
Page
10 - 4
MB-20-G/MB-200G-W_MB-LABmaster_MB-200 MOD_TP700
Operating Manual - V5.0 - 04/2018 - STD
10.3.2 Optional antechamber equipment
Name Function MBRAUN sales no.
T-antechamber
MB-SCH-
T-390-800-CYL
For multibox sys-
tems: allows trans-
fer of processes
between 2glove-
boxes or between
a glovebox and
outside environ-
ment
1500210
Antechamber oven,
vacuum oven
MB-OR(L)-H-
V-150-390
Heats up process
material in a va-
cuum up to 150 °C
1500235 (right)
1500236 (left)
Antechamber oven,
vacuum oven
MB-OR(L)-H-
V-250-390-W
Heats up process
material in a va-
cuum up to 250 °C
1500233 (right)
1500234 (left)
Antechamber oven,
vacuum oven
MB-OR(L)-H-
V-600-390-W
Heats up process
material in a va-
cuum up to 600 °C
1500221 (right)
1500222 (left)
For more optional available equipment please contact MBRAUNService.
10.4 Customer-specific components
MBRAUN can integrate customer-specific components into inert gas systems. This al-
lows implementation of customer-specific processes, special controller functions and
safety requirements.
Special requirements and customer requests can be planned and implemented in con-
sultation the MBRAUN Service.
10.5 Equipment from other manufactures
MBRAUN inert gas systems can be equipped with components from other 3rd party man-
ufacturers.
The original supplier documentation will then be included in the scope of delivery.
MBRAUN assumes no liability for the contents of the documentation provided by 3rd
party manufacturers.