MBRAUN LABmaster pro sp - Page 213

9 Antechamber operation (Vacuum antechamber)
Optional antechamber features
MB-20-G/MB-200G-W_MB-LABmaster_MB-200 MOD_TP700
Operating Manual - V5.0 - 04/2018 - STD
Page
9 - 21
MBRAUN product Description MBRAUN sales number
MB-AC-vent external
(PLC)
Refill the antechamber with inert
gas from external source
1
or
ambient air:
¡ To speed up antechamber
processes: for large ante-
chambers with an interior
volume that is not signific-
antly smaller than the
volume of the glovebox.
¡ If the antechamber must not
be flooded with contamin-
ated box atmosphere (e.g. if
solvents or special gases
are used in the glovebox).
1502052
MB-AC-vent external
(manual)
Refill the antechamber with inert
gas from external source
1
or
ambient air:
¡ To speed up antechamber
processes: for large ante-
chambers with an interior
volume that is not signific-
antly smaller than the
volume of the glovebox.
¡ If the antechamber must not
be flooded with contamin-
ated box atmosphere (e.g. if
solvents or special gases
are used in the glovebox).
1502051
Button operation Antechambers can be operated
with external push-buttons, loc-
ated on the antechamber.
Please contact
MBRAUN Service.
1
A safety overpressure control valve is required
For more optional available features please contact MBRAUNService.