Mitsubishi Electric Q12DCCPU-V - Page 463

15
STARTING A MULTIPLE CPU SYSTEM
15.2 Setting Parameters Added for Multiple CPU Systems
15.2.3 When creating a new system
15 - 9
9
DEVICE DESCRIPTION
10
MULTIPLE CPU SYSTEM OVERVIEW
11
MULTIPLE CPU SYSTEM CONFIGURATION
12
CONCEPT OF MULTIPLE CPU SYSTEM
13
COMMUNICATIONS BETWEEN CPU MODULES
14
PARAMETERS ADDED FOR MULTIPLE CPU SYSTEMS
15
STARTING A MULTIPLE CPU SYSTEM
16
TROUBLESHOOTING
(From the previous page)
(To the next page)
Communication area setting (refresh setting) in the <<Multiple CPU
settings>> tab (optional)
Auto refresh settings (optional)
"CPU specific send range" in the <<Multiple CPU settings>> tab
(setting required)
Number of CPUs Setting range
3
4
2
0 to 14K points
0 to 12K points
0 to 13K points
Set the points of data to be sent and received between CPUs.
The setting range is shown below.
Set the points of data to be sent and received by auto refresh
between CPUs.
Set the points for all CPUs in the multiple CPU system. (Select
from CPU No.1 to No.4.)
After setting values, click the End button to close the Auto
refresh settings screen.
Set this when communicating with the Q06CCPU-V(-B).