Mitsubishi Electric Q12DCCPU-V - Page 465

15
STARTING A MULTIPLE CPU SYSTEM
15.2 Setting Parameters Added for Multiple CPU Systems
15.2.3 When creating a new system
15 - 11
9
DEVICE DESCRIPTION
10
MULTIPLE CPU SYSTEM OVERVIEW
11
MULTIPLE CPU SYSTEM CONFIGURATION
12
CONCEPT OF MULTIPLE CPU SYSTEM
13
COMMUNICATIONS BETWEEN CPU MODULES
14
PARAMETERS ADDED FOR MULTIPLE CPU SYSTEMS
15
STARTING A MULTIPLE CPU SYSTEM
16
TROUBLESHOOTING
(2) For the Q06CCPU-V(-B)
Start
Start C Controller setting utility.
Connect to the C Controller module.
(To the next page)
"Points occupied by empty slot" in the
<<System settings>> tab (optional)
Set the points to be occupied by one empty slot.
Default: 16 points
"Number of CPUs" in the <<Multiple CPU
settings>> tab (setting required)
Set the number of CPU modules
mounted on the main base unit in the
multiple CPU system.