16 - 43
16.3 Actions to be Taken When the ERR. LED is On or Flashing
16
TROUBLESHOOTING
Table 16.3 Error codes (continued)
Error code Error message Error information
LED status
CPU operation status
RUN ERR.
1432 MULTI-C.BUS.ERR.
Module No.
*1
Off Flashing Stop
1433 MULTI-C.BUS.ERR.
Module No.
*1
Off Flashing Stop
1434 MULTI-C.BUS.ERR.
Module No.
*1
Off Flashing Stop
1435 MULTI-C.BUS.ERR.
Module No.
*1
Off Flashing Stop
1436 MULTI-C.BUS.ERR. Off Flashing Stop
1437 MULTI-C.BUS.ERR. Off Flashing Stop
1439 MULTI-C.BUS.ERR. Off Flashing Stop
1500 AC/DC DOWN On Off Continue
1510 SINGLE PS.DOWN Base No./Power supply No. On On Continue
1520 SINGLE PS.ERROR Base No./Power supply No. On On Continue
1600 BATTERY ERROR On On Continue
* 1 The error information (module No.) in "Event information" in the <<Event history>> tab of C Controller setting utility is displayed as follows:
"Error information: XX - YYY"
XX (DEC.): Slot No.(0 to 63), CPU No.(1 to 4)
YYY (HEX.): Start I/O No. 16 (000 to 0FF, 3E0 to 3E3)
To Next Page
Loading...
