APPX - 40
Appendix 10 Connection with MX Component
Appendix 10.1 Accessing the host station
APPENDICES
(2) Ethernet connection
To access the host station from the C Controller module via Ethernet, follow the
procedure below.
1) Start the communication setting wizard from the communication setting utility.
2) Select a value for logical station number, and click the button.
3) Set the personal computer side interface as follows, and click the
button.
• Select "Ethernet board" for "PC side I/F".
• Select "CPU module" for "Connect module".
• Select "TCP" for "Protocol".
Next >
To Next Page
Loading...
