Mitsubishi Electric Q12DCCPU-V - Page 605

APPENDICES
Appendix 10 Connection with MX Component
Appendix 10.1 Accessing the host station
APPX - 41
A
I
4) Set the programmable controller side interface as follows, and click the
button.
• Select "CPU module" for "PLC side I/F".
• When setting a host name for "Host (IP Address)", input the name of the
hosts file in no more than 64 characters.
When setting an IP address, input the IP address of the C Controller
module to be connected.
• C Controller modules cannot be searched by the
button.
5) Set the network as follows, and click the button.
• Select "Host station" for "Station type".
• Select the type of the CPU module to be accessed for "CPU type".
• Select the number of the CPU module to be accessed for "Multiple CPU".
Next >
Find CPU (Built-in Ethernet port) on network
Next >