Panasonic FP Series User Manual

Table of Contents
22
37. GT panel instructions ...........................................................................1133
GT_ActivateScreen Control the GT panel screen
1134
GT_ChangeBacklightBrightness Changes the backlight brightness of a GT panel
1136
38. High-speed counter instructions.........................................................1137
38.1 Introduction..........................................................................................................................1138
38.2 High-speed counter control instructions ..............................................................................1139
HscControl_CountingDisable Disables counting on a high-speed counter channel
1140
HscControl_CountingEnable Enables counting on a high-speed counter channel
1142
HscControl_ElapsedValueContinue Continues counting after reset
1144
HscControl_ElapsedValueReset Sets elapsed value to 0
1146
HscControl_HscInstructionClear Clears high-speed counter instruction
1148
HscControl_ResetInputDisable Disables reset input
1150
HscControl_ResetInputEnable Enables reset input
1151
HscControl_SetDefaults Sets defaults for high-speed counter channel
1152
HscControl_WriteElapsedValue Writes elapsed value into high-speed counter channel
1153
38.3 High-speed counter information instructions .......................................................................1155
HscInfo_GetControlCode Returns control code of high-speed counter channel
1156
HscInfo_GetCurrentSpeed Returns current speed of high-speed counter channel
1157
HscInfo_IsActive Checks if high-speed counter is active
1158
HscInfo_IsChannelEnabled Checks if high-speed counter channel is enabled
1159
HscInfo_IsCountingDisabled Checks if counting is disabled
1160
HscInfo_IsElapsedValueReset Checks if elapsed value is set to 0
1161
HscInfo_IsResetInputDisabled Checks if reset input is disabled
1162
HscInfo_ReadElapsedValue Reads elapsed value from high-speed counter channel
1164
HscInfo_ReadTargetValue Reads target value from high-speed counter channel
1165
38.4 High-speed counter target value match control ...................................................................1166
Hsc_TargetValueMatch_Reset Target value match OFF (high-speed counter)
1167
Hsc_TargetValueMatch_Set Target value match ON (high-speed couter)
1169
39. Pulse output instructions.....................................................................1171
39.1 Introduction..........................................................................................................................1172
39.2 Pulse output function blocks................................................................................................1173
PulseOutput_Center_FB Circular interpolation (center position)
1174
PulseOutput_Home_FB Home return
1177
PulseOutput_Jog_FB JOG operation
1180
PulseOutput_Jog_Positioning0_FB JOG operation and positioning
1182

Panasonic FP Series Specifications

General

Mounting	DIN rail
Type	PLC
Communication Interface	RS-232, RS-485, Ethernet (depending on model)
Input Voltage	100-240V AC or 24V DC (depending on model)
Output Type	Relay, Transistor
I/O Points	Varies by model
Operating Temperature	0°C to 55°C
Dimensions	Varies by model
Weight	Varies by model