EasyManua.ls Logo

Rohde & Schwarz R&S FSL3 - Page 1009

Rohde & Schwarz R&S FSL3
1734 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
STATus Subsystem R&S FSL
1300.2519.12 6.250 E-11
S
TATus:QUEStionable:POWer:NTRansition
This command sets the edge detectors of all bits of the STATus:QUEStionable:POWer register
from 1 to 0 for the transitions of the CONDition bit.
Parameter
0 to 65535
Example
STAT:QUE:POWS:NTR 65535
Characteristics
*RST value: –
SCPI: conform
Mode
all
STATus:QUEStionable:POWer:PTRansition
This command sets the edge detectors of all bits of the STATus:QUEStionable:POWer register
from 0 to 1 for the transitions of the CONDition bit.
Parameter
0 to 65535
Example
STAT:QUES:POW:PTR 65535
Characteristics
*RST value: –
SCPI: conform
Mode
all
STATus:QUEStionable:SYNC[:EVENt]?
This command queries the contents of the EVENt section of the STATus:QUEStionable:SYNC
register.
Readout deletes the contents of the EVENt section.
This command is available from firmware version 1.30.
Example
STAT:QUES:SYNC?
Characteristics
*RST value: –
SCPI: device–specific
Mode
all

Table of Contents

Related product manuals