SYSTem Subsystem R&S FSL
1300.2519.12 6.256 E-11
S
YSTem:DATE
This command is used to enter the date for the internal calendar.
T
he sequence of entry is year, month, day.
Parameter
1980 to 2099, 1 to 12, 1 to 31
Example
SYST:DATE 2000,6,1
Characteristics
*RST value: -
SCPI: conform
Mode
all
SYSTem:DISPlay:FPANel
This command activates or deactivates the display of the front panel keys on the screen.
With the display activated, the instrument can be operated on the screen using the mouse by
pressing the corresponding buttons.
Parameter
ON | OFF
Example
SYST:DISP:FPAN ON
Characteristics
*RST value: OFF
SCPI: device-specific
Mode
all
SYSTem:DISPlay:UPDate
In remote control mode, this command switches on or off the instrument display. If switched on,
only the diagrams, traces and display fields are displayed and updated.
Note: The best performance is obtained if the display output is switched off during remote
control.
Parameter
ON | OFF
Example
SYST:DISP:UPD ON
Characteristics
*RST value: OFF
SCPI: device-specific
Mode
all
To Next Page
Loading...
