Rohde & Schwarz R&S FSL3 - Page 1014

R&S FSL SYSTem Subsystem
1300.2519.12 6.255 E-11
C
haracteristics
*RST value: NONE
SCPI: device-specific
M
ode
all
SYSTem:COMMunicate:PRINter:ENUMerate:FIRSt?
This command queries the name of the first printer (in the list of printers) available under
Windows XP.
The names of other installed printers can be queried with the
SYSTem:COMMunicate:PRINter:ENUMerate[:NEXT?] command.
If no printer is configured an empty string is output.
Example
SYST:COMM:PRIN:ENUM:FIRS?
Characteristics
*RST value: NONE
SCPI: device-specific
Mode
all
SYSTem:COMMunicate:PRINter:SELect <1|2>
This command selects one of the printers configured under Windows XP including the
associated output destination.
The specified printer name must be a string as returned by the commands
SYSTem:COMMunicate:PRINter:ENUMerate:FIRSt? or
SYSTem:COMMunicate:PRINter:ENUMerate[:NEXT?]
Note: The HCOPy:DESTination<1|2> command is used to select an output medium other
than the default one.
Parameter
<printer_name>
Example
SYST:COMM:PRIN:SEL LASER on LPT1
Characteristics
*RST value: NONE
SCPI: device-specific
Mode
all