Rohde & Schwarz R&S FSL3 - Page 1019

SYSTem Subsystem R&S FSL
1300.2519.12 6.260 E-11
S
YSTem:LXI:PASSword
This command shows or changes the LXI password.
T
his command is available from firmware version 1.90.
Parameter
<password>
Example
SYST:LXI:PASS
Characteristics
*RST value:
SCPI: device-specific
Mode
all
SYSTem:PASSword[:CENable]
This command enables access to the service functions by means of the password.
This command is an event and therefore has no *RST value and no query.
Parameter
<password>
Example
SYST:PASS XXXX
Characteristics
*RST value: -
SCPI: conform
Mode
all
SYSTem:PASSword:RESet
This command resets the service password.
This command is an event and therefore has no *RST value and no query.
Example
SYST:PASS:RES
Characteristics
*RST value: -
SCPI: conform
Mode
all