R&S FSL SYSTem Subsystem
1300.2519.12 6.261 E-11
S
YSTem:PRESet
This command initiates an instrument reset.
The effect of this command corresponds to that of the PRESET key with manual operation or to
the *RST command. For details on preset settings refer to chapter 4 "Instrument Functions -
A
nalyzer", section "Initializing the Configuration - PRESET Key".
Example
SYST:PRES
Characteristics
*RST value: -
SCPI: conform
Mode
all
SYSTem:TIME
This command sets the internal clock. The sequence of entry is hour, minute, second.
Parameter
0 to 23, 0 to 59, 0 to 59
Example
SYST:TIME 12,30,30
Characteristics
*RST value: -
SCPI: conform
Mode
all
SYSTem:VERSion?
This command queries the number of the SCPI version, which is relevant for the instrument.
This command is a query and therefore has no *RST value.
Example
SYST:VERS?
Characteristics
*RST value: -
SCPI: conform
Mode
all
To Next Page
Loading...
