Rohde & Schwarz R&S FSL3 - Page 1028

R&S FSL TRACe Subsystem
1300.2519.12 6.269 E-11
Instrument models with WDDC motherboard
The following tables list the maximum bandwidths depending on the output sample rates.
– 65,833,333.333 MHz to 65,833,333.000 MHz
– 65,833,332.999 MHz to 10.7 MHz
– 10.7 MHz to 3.2 MHz
– 3.2 MHz to 1 MHz
– 1 MHz to 105 kHz
– 105 kHz to 10 kHz
65,833,333.333 MHz to 65,833,333.000 MHz
This small range of the sample rate is for test purposes only and is not recommended for normal
measurements!
Sample rate from
[Hz]
Sample rate to
[Hz]
Max bandwidth
[Hz]
65 833 333.333 65 833 333.000 20 000 000.000
Beware:
decimation filters
are bypassed!
65,833,332.999 MHz to 10.7 MHz
Sample rate from
[Hz]
Sample rate to
[Hz]
Max bandwidth
[Hz]
65 833 332.999 32 916 666.670 20 000 000.000
22 500 000.000 20 248 687.500 17 998 833.330
20 248 687.500 16 401 436.880 14 579 055.000
16 401 436.880 14 812 500.000 13 166 666.670
14 812 500.000 13 331 250.000 11 850 000.000
13 331 250.000 11 998 125.000 10 665 000.000
11 998 125.000 10 798 312.500 9 598 500.000
10.7 MHz to 3.2 MHz
Sample rate from
[Hz]
Sample rate to
[Hz]
Max bandwidth
[Hz]
10 798 312.500 9 875 000.000 8 777 777.778
9 875 000.000 8 887 500.000 7 900 000.000
8 887 500.000 7 998 750.000 7 110 000.000
7 998 750.000 7 406 250.000 6 583 333.333
7 406 250.000 6 665 625.000 5 925 000.000
6 665 625.000 6 583 333.333 5 851 851.852
6 583 333.333 5 925 000.000 5 266 666.667
5 925 000.000 5 332 500.000 4 740 000.000
5 332 500.000 4 937 500.000 4 388 888.889
4 937 500.000 4 443 750.000 3 950 000.000