Rohde & Schwarz R&S FSL3 - Page 1175

CALCulate Subsystem (CATV, K20) R&S FSL
1300.2519.12 6.416 E-11
CALCulate<1|2>:ATV:LIMit:CARRiers:S2PRelative:LOWer
This command defines the relative lower power limit of the sound carrier 2.
The numeric suffixes <1|2> are irrelevant.
Parameter
–200 to 200 dB
E
xample
CALC:ATV:LIM:CARR:S2PR:LOW –20
Sets the relative lower power limit for sound carrier 2 to –20 dB.
Characteristics
RST value: –27 dB
SCPI: device–specific
Mode
CATV
CALCulate<1|2>:ATV:LIMit:CARRiers:S2PRelative:UPPer
This command defines the relative upper power limit of the sound carrier 2.
The numeric suffixes <1|2> are irrelevant.
Parameter
–200 to 200 dB
Example
CALC:ATV:LIM:CARR:S2PR:UPP –14
Sets the relative lower power limit for sound carrier 2 to –14 dB.
Characteristics
RST value: –13 dB
SCPI: device–specific
Mode
CATV
CALCulate<1|2>:ATV:LIMit:CARRiers:VCFoffset:LOWer
This command defines the lower frequency offset limit of the vision carrier.
The numeric suffixes <1|2> are irrelevant.
Parameter
–999,999 to 999,999 Hz
Example
CALC:ATV:LIM:CARR:VCF:LOW –1KHZ
Sets the lower frequency offset limit of the vision carrier to –1 kHz.
Characteristics
RST value: –10 kHz
SCPI: device–specific
Mode
CATV