Rohde & Schwarz R&S FSL3 - Page 1177

CALCulate Subsystem (CATV, K20) R&S FSL
1300.2519.12 6.418 E-11
CALCulate<1|2>:ATV:LIMit:CN:CN[:LOWer]
This command defines the lower limit for the carrier–to–noise ratio.
The numeric suffixes <1|2> are irrelevant.
Parameter
–200 to 200 dB
E
xample
CALC:ATV:LIM:CN:CN 10
Sets the lower limit of the carrier–to–noise ratio to 10 dB.
Characteristics
RST value: 40 dB
SCPI: device–specific
Mode
CATV
CALCulate<1|2>:ATV:LIMit:CSO:CSO[:LOWer]
This command defines the lower limit for the carrier–to–second order beat ratio.
The numeric suffixes <1|2> are irrelevant.
Parameter
–200 to 200 dB
Example
CALC:ATV:LIM:CSO:CSO 10
Sets the lower limit of the carrier–to–second order beat ratio to 10 dB.
Characteristics
RST value: 0 dB
SCPI: device–specific
Mode
CATV
CALCulate<1|2>:ATV:LIMit:CTB:CTB[:LOWer]
This command defines the lower limit for the carrier–to–composite triple beat ratio.
The numeric suffixes <1|2> are irrelevant.
Parameter
–200 to 200 dB
Example
CALC:ATV:LIM:CTB:CTB 10
Sets the lower limit of the carrier–to–second order beat ratio to 10 dB.
Characteristics
RST value: 0 dB
SCPI: device–specific
Mode
CATV