CALCulate Subsystem (CATV, K20) R&S FSL
1300.2519.12 6.458 E-11
C
ALCulate:DTV:LIMit:RESult:SROFfset:UPPer?
This command performs an upper limit check for the symbol rate offset in the Overview
measurement.
This command is a query and therefore has no *RST value.
Example
CALC:DTV:LIM:SROF:UPP 1000
Sets the upper limit for the symbol rate offset to 1000 symb/s.
INIT;*WAI
Starts a new measurement and waits for the sweep end.
CALC:DTV:LIM:RES:SROF:UPP?
Performs an upper limit check for the symbol rate offset.
Characteristics
RST value: 10000
SCPI: device–specific
Mode
CATV
To Next Page
Loading...
