Rohde & Schwarz R&S FSL3

To Next Page

To Previous Page

CONFigure Subsystem (CATV, K20) R&S FSL

1300.2519.12 6.470 E-11

ONFigure:ATV:CSO:MEASurement

This command configures a new carrier or noise measurement with the next sweep for the

Carrier–to–Second Order Beat Ratio measurement.

Parameter

CARRier | NOISe

Example

CONF:ATV:MEAS CSO

Configures the analog TV Carrier–to–Second Order Beat Ratio measurement.

ATV:CSO:MEAS:MODE OSER

Sets the Off–Service measurement method.

CONF:ATV:CSO:MEAS CARR

Configures a new carrier measurement with the next sweep.

INIT;*OPC

Starts the new noise measurement.

Characteristics

RST value: CARRier

SCPI: device–specific

Mode

CATV

CONFigure:ATV:CTB:MEASurement

This command configures a new carrier or noise measurement with the next sweep for the

Carrier–to–Composite Triple Beat Ratio measurement.