R&S FSL CONFigure Subsystem (CATV, K20)
1300.2519.12 6.471 E-11
C
ONFigure:ATV:MEASurement
This command defines the analog measurement type.
Parameter
ASPectrum Spectrum measurement
CARRiers Carrier Power measurement
CN Carrier–to–Noise Ratio measurement
HUM Hum measurement
VMODulation Vision Modulation measurement
CTB Carrier–to–Composite Triple Beat Ratio measurement
CSO Carrier–to–Second Order Beat Ratio measurement
VSCope Video Scope measurement
Example
CONF:ATV:MEAS CARR
Configures the R&S FSL to measure the carrier power.
Characteristics
RST value: ASPectrum
SCPI: device–specific
Mode
CATV
To Next Page
Loading...
