CONFigure Subsystem (CATV, K20) R&S FSL
1300.2519.12 6.472 E-11
CONFigure:DTV Subsystem (CATV, K20)
The CONFigure:DTV subsystem contains commands to configure digital TV measurements.
Commands of the CONFigure:DTV:MEASurement Subsystem
– CONFigure:DTV:MEASurement
– CONFigure:DTV:MEASurement:SATTenuation
CONFigure:DTV:MEASurement
This command defines the digital measurement type.
Parameter
DSPectrum Spectrum measurement
CHPower Channel Power measurement
CONS Constellation Diagram measurement
MERRors Modulation Errors measurement
EPATtern Echo Pattern measurement
APD Amplitude Probability Density Function measurement
CCDF Complementary Cumulative Distribution Function measurement
OVERview Overview measurement
Example
CONF:DTV:MEAS APD
Configures the R&S FSL to measure the amplitude probability density function.
Characteristics
RST value: DSP
SCPI: device–specific
Mode
CATV
CONFigure:DTV:MEASurement:SATTenuation
This command activates or deactivates the shoulder measurement in accordance to
ETSI TR 101290 standard.
Parameter
ON | OFF
Example
CONF:DTV:MEAS:SATT OFF
Configures the R&S FSL to measure the upper and lower shoulder attenuation.
Characteristics
RST value: ON
SCPI: device–specific
Mode
CATV
To Next Page
Loading...
