Rohde & Schwarz R&S FSL3 - Page 1249

SENSe Subsystem (CATV, K20) R&S FSL
1300.2519.12 6.490 E-11
Example
ATV:CSO:MEAS:MODE QLIN
Sets the Quiet Line measurement method.
Characteristics
RST value: OSER
SCPI: device–specific
Mode
CATV
[SENSe<1|2>:]ATV:CSO:POWer:NCORrection
This command activates or deactivates the noise floor correction.
The numeric suffixes <1|2> are irrelevant.
Parameter
ON | OFF
Example
ATV:CSO:POW:NCOR ON
Activates the noise floor correction.
Characteristics
RST value: OFF
SCPI: device–specific
Mode
CATV
[SENSe<1|2>:]ATV:CSO:POWer:REFerence:CHANnel:MANual
This command defines the reference channel.
The numeric suffixes <1|2> are irrelevant.
Parameter
<numeric_value>, corresponding to active channel
Example
ATV:CSO:POW:REF:CHAN:MAN 6
Sets channel 6 in the active channel table as reference channel.
Characteristics
RST value: active measurement channel
SCPI: device–specific
Mode
CATV