Rohde & Schwarz R&S FSL3 - Page 1250

R&S FSL SENSe Subsystem (CATV, K20)
1300.2519.12 6.491 E-11
[
SENSe<1|2>:]ATV:CSO:POWer:REFerence:MANual
This command defines the manual reference power. The unit is set via the
CALCulate<1|2>:UNIT:POWer command.
The numeric suffixes <1|2> are irrelevant.
Parameter
–200 to 200 dB
Example
ATV:CSO:POW:REF:MAN 20
Sets the reference power to 20.
Characteristics
RST value: 10
SCPI: device–specific
Mode
CATV
[SENSe<1|2>:]ATV:CSO:POWer:REFerence:MODE
This command defines the reference power method.
The numeric suffixes <1|2> are irrelevant.
Parameter
RCHannel reference channel
([SENSe<1|2>:]ATV:CSO:POWer:REFerence:CHANnel:MANual
command)
MCHannel same as measurement channel
MANual manual reference power
([SENSe<1|2>:]ATV:CSO:POWer:REFerence:MANual command)
Example
ATV:CSO:POW:REF:MODE RCH
Sets the reference channel method.
Characteristics
RST value: MCH
SCPI: device–specific
Mode
CATV