Rohde & Schwarz R&S FSL3 - Page 1227

CALCulate Subsystem (CATV, K20) R&S FSL
1300.2519.12 6.468 E-11
CALCulate:UNIT Subsystem (CATV, K20)
The CALCulate:UNIT subsystem defines the units for the parameters that can be set and the
measurement results.
Commands of the CALCulate:UNIT Subsystem
– CALCulate<1|2>:UNIT:POWer
CALCulate<1|2>:UNIT:POWer
This command selects the unit for power.
The numeric suffixes <1|2> are irrelevant.
Parameter
DBM | DBUV | DBMV | DBPW | VOLT | V | W | WATT | A | AMPere
Example
CALC:UNIT:POW V
Sets the unit to Volt.
Characteristics
RST value: dBm
SCPI: device–specific
Mode
CATV