Rohde & Schwarz R&S FSL3 - Page 1226

R&S FSL CALCulate Subsystem (CATV, K20)
1300.2519.12 6.467 E-11
CALCulate:STATistics Subsystem (CATV, K20)
The CALCulate: STATistics subsystem defines the scaling for the APD and CCDF measurements.
Commands of the CALCulate: STATistics Subsystem
– CALCulate: STATistics:NSAMples
– CALCulate:STATistics:PRESet
– CALCulate:STATistics:RESult<1...4>?
– CALCulate:STATistics:SCALe:AUTO
– CALCulate:STATistics:SCALe:X:RANGe
– CALCulate:STATistics:SCALe:X:RLEVel
– CALCulate:STATistics:SCALe:Y:LOWer
– CALCulate:STATistics:SCALe:Y:UPPer
CALCulate: STATistics:NSAMples
For details refer to "CALCulate:STATistics:NSAMples" on page 6.113.
CALCulate:STATistics:PRESet
For details refer to "CALCulate:STATistics:PRESet" on page 6.113.
CALCulate:STATistics:RESult<1...4>?
For details refer to "CALCulate:STATistics:RESult<1...6>?" on page 6.114.
CALCulate:STATistics:SCALe:AUTO
For details refer to "CALCulate:STATistics:SCALe:AUTO" on page 6.114.
CALCulate:STATistics:SCALe:X:RANGe
For details refer to "CALCulate:STATistics:SCALe:X:RANGe" on page 6.115.
CALCulate:STATistics:SCALe:X:RLEVel
For details refer to "CALCulate:STATistics:SCALe:X:RLEVel" on page 6.115.
CALCulate:STATistics:SCALe:Y:LOWer
For details refer to "CALCulate:STATistics:SCALe:Y:LOWer" on page 6.115.
CALCulate:STATistics:SCALe:Y:UPPer
For details refer to "CALCulate:STATistics:SCALe:Y:UPPer" on page 6.116.