Rohde & Schwarz R&S FSL3 - Page 1225

CALCulate Subsystem (CATV, K20) R&S FSL
1300.2519.12 6.466 E-11
CALCulate<1|2>:MARKer<1...4>:X:SLIMits:RIGHT
For details refer to "CALCulate<1|2>:MARKer<1...4>:X:SLIMits:RIGHT" on page 6.65.
CALCulate<1|2>:MARKer<1...4>:X:SLIMits[:STATe]
For details refer to "CALCulate<1|2>:MARKer<1...4>:X:SLIMits[:STATe]" on page 6.64.
CALCulate<1|2>:MARKer<1...4>:Y?
For details refer to "CALCulate<1|2>:MARKer<1...4>:Y?" on page 6.66.
CALCulate<1|2>:MARKer<1...4>:Y:PERCent
For details refer to "CALCulate<1|2>:MARKer<1...4>:Y:PERCent" on page 6.67.
CALCulate:MARKer:FUNCtion Subsystem (CATV, K20)
The CALCulate:MARKer:FUNCtion subsystem checks the marker functions in the instrument.
Commands of the CALCulate:MARKer:FUNCtion Subsystem
– CALCulate<1|2>:MARKer<1...4>:FUNCtion:CENTer
– CALCulate<1|2>:MARKer<1...4>:FUNCtion:REFerence
CALCulate<1|2>:MARKer<1...4>:FUNCtion:CENTer
For details refer to "CALCulate<1|2>:MARKer<1...4>:FUNCtion:CENTer" on page 6.70.
CALCulate<1|2>:MARKer<1...4>:FUNCtion:REFerence
For details refer to "CALCulate<1|2>:MARKer<1...4>:FUNCtion:REFerence" on page 6.79.