Cable TV Measurements (Option K20) R&S FSL
1300.2519.12 2.100 E-11
Fig. 2-71 Digital TV spectrum using a Channel Table. No input signal!
13. Press the Channel No softkey.
14. Choose one of the digital TV channels that are present in the channel table, because we are in a
measurement designed for digital TV signals.
15. Press the MEAS key.
16. Press the TV Analyzer softkey.
17. Press the Tilt softkey.
18. Press the Auto Range softkey.
The resulting measurement is displayed (see Fig. 2-72).
Fig. 2-72 Tilt measurement using a Channel Table. No input signal!
To Next Page
Loading...
