Rohde & Schwarz R&S FSL3 - Page 1254

R&S FSL SENSe Subsystem (CATV, K20)
1300.2519.12 6.495 E-11
[
SENSe<1|2>:]ATV:CTB:POWer:REFerence:MODE
This command defines the reference power method.
T
he numeric suffixes <1|2> are irrelevant.
Parameter
RCHannel reference channel
([SENSe<1|2>:]ATV:CTB:POWer:REFerence:CHANnel:MANual
command)
MCHannel same as measurement channel
MANual manual reference power
([SENSe<1|2>:]ATV:CTB:POWer:REFerence:MANual command)
Example
ATV:CTB:POW:REF:MODE MAN
Sets the reference channel method.
Characteristics
RST value: RCH
SCPI: device–specific
Mode
CATV
[SENSe<1|2>:]ATV:CTB:TABle<1...10>:MFRequencies
This command defines the measurement frequencies (center frequencies and span values), and
activates or deactivates them for the CTB measurement.
The numeric suffix <1...10> defines the table row. The numeric suffixes <1|2> are irrelevant.
Parameter
0 | 1,<numeric_value>,<numeric_value>
0 deactivated
1 activated
first numeric value center frequency in Hz
second numeric value span in Hz
Example
ATV:CTB:TABL1:MFR 1,100,10000
Activates the entries of the first table row for the measurement and sets the center frequency to
100 Hz and the span to 10 kHz.
ATV:CTB:TABL2:MFR 1,200,20000
Activates the second row entries for the measurement and sets the center frequency to 200 Hz
and the span to 20 kHz.
Characteristics
RST value: 1,0 Hz, 200 kHz (row 1); 0,0,200 kHz (row 2–10)
SCPI: device–specific
Mode
CATV