Rohde & Schwarz R&S FSL3 - Page 1277

TRIGger Subsystem (CATV, K20) R&S FSL
1300.2519.12 6.518 E-11
C
haracteristics
RST value: 18
SCPI: device–specific
M
ode
CATV
TRIGger<1|2>[:SEQuence]:VIDeo:BLINe:TYPE
This command sets the bar line type for analog TV measurements.
Parameter
CCIR17 | FCC | NTC7
Example
TRIG:VID:BLIN:TYPE CCIR17
Sets the bar line type to CCIR17.
Characteristics
RST value: CCIR17
SCPI: device–specific
Mode
CATV
TRIGger<1|2>[:SEQuence]:VIDeo:FIELd:[NUMBer]
This command defines the active field in the Video Scope measurement.
Parameter
1 | 2
Example
TRIG:VID:FIEL 2
Sets the active field 2.
Characteristics
RST value: 1
SCPI: conform
Mode
CATV