Rohde & Schwarz R&S FSL3 - Page 1278

R&S FSL TRIGger Subsystem (CATV, K20)
1300.2519.12 6.519 E-11
T
RIGger<1|2>[:SEQuence]:VIDeo:LINE:[NUMBer]
This command activates triggering at the horizontal sync signal of the indicated line number in
the Video Scope measurement.
Parameter
<numeric_value>, depending on the numbering conventions of the TV standard and the color
system
Example
TRIG:VID:LINE 17
Characteristics
*RST value: 1
SCPI: conform
Mode
CATV
TRIGger<1|2>[:SEQuence]:VIDeo:QFIeld[:NUMBer]
This command sets the quiet line field for analog TV measurements.
Parameter
1 | 2
Example
TRIG:VID:QFI 2
Sets the quiet line field to 2.
Characteristics
RST value: 1
SCPI: device–specific
Mode
CATV
TRIGger<1|2>[:SEQuence]:VIDeo:QLINe[:NUMBer]
This command sets the quiet line parameter for analog TV measurements.
Parameter
<numeric_value>
Example
TRIG:VID:QLIN 20
Sets the quiet line parameter to 20.
Characteristics
RST value: 22
SCPI: device–specific
Mode
CATV