FETCh Subsystem (Noise Figure, K30) R&S FSL
1300.2519.12 6.544 E-11
FETCh:SCALar:NOISE:FIGure?
This command queries the last recorded noise figure measurement result for a fixed frequency
measurement.
This command is only a query and therefore has no *RST value.
Example
FETCh:SCAL:NOISE:FIGure?
Returns the last noise figure measurement obtained from a fixed frequency measurement.
Characteristics
*RST value: –
SCPI: device–specific
Mode
NF
FETCh:SCALar:NOISE:GAIN?
This command queries the last recorded noise gain measurement result for a fixed frequency
measurement.
This command is only a query and therefore has no *RST value.
Example
FETCh:SCAL:NOISE:GAIN?
Returns the last noise gain measurement obtained from a fixed frequency measurement.
Characteristics
*RST value: –
SCPI: device–specific
Mode
NF
FETCh:SCALar:NOISE:TEMPerature?
This command queries the last recorded noise temperature measurement result for a fixed
frequency measurement.
This command is only a query and therefore has no *RST value.
Example
FETCh:SCAL:NOISE:TEMPerature?
Returns the last noise temperature measurement obtained from a fixed frequency
measurement.
Characteristics
*RST value: –
SCPI: device–specific
Mode
NF
To Next Page
Loading...
