STATus Subsystem (Noise Figure, K30) R&S FSL
1300.2519.12 6.562 E-11
STATus:QUEStionable:LIMit<1|2>:PTRansition
This command determines what bits in the STATus:QUESionable:LIMit Condition register set
the corresponding bit in the STATus:QUESionable:LIMit Event register if that bit has a positive
transition (0 to 1). The variable <number> is the sum of the decimal values of the bits that are to
be enabled.
Parameter
0 to 65535
Example
STAT:QUES:PTR 65535
All condition bits are summarized in the Event register if a positive transition occurs.
Characteristics
*RST value: –
SCPI: device–specific
Mode
NF
To Next Page
Loading...
