R&S FSL CALCulate Subsystem (WCDMA, K72)
1300.2519.12 6.571 E-11
Characteristics
RST value: –
SCPI: device–specific
Mode
WCDMA
CALCulate<1|2>:LIMit<1...8>:ESPectrum:TRANsition
This command defines the offset frequency at which the resolution bandwidth is changed.
The numeric suffixes <1|2> and <1...8> are irrelevant for this command.
Parameter
30 kHz to 1 MHz
Example
CONF:WCDP:MEAS ESP
Selects the spectrum emission mask measurement.
CALC:LIM:ESP:TRAN 5MHZ
Defines the offset frequency at which the resolution bandwidth is changed.
Characteristics
RST value: 4.0 MHz
SCPI: device–specific
Mode
WCDMA
CALCulate<1|2>:LIMit<1...8>:ESPectrum:VALue
This command selects one of the following predefined limit lines. As a prerequisite, the
predefined limit lines must be activated using the
CALCulate<1|2>:LIMit<1...8>:ESPectrum:MODE command.
The numeric suffixes <1|2> and <1...8> are irrelevant for this command.
Parameter
43 P
43 dBm
39 39 dBm
P < 43 dBm
31 31 dBm
P < 39 dBm
0 P < 31 dBm
P stands for the expected power value.
Example
CONF:WCDP:MEAS ESP
Selects the spectrum emission mask measurement.
CALC:LIM:ESP:MODE MAN
Activates the selected predefined limit lines.
CALC:LIM:ESP:VAL 39
Selects the predefined limit line 39 dBm
P < 43 dBm.
To Next Page
Loading...
