Remote Commands of the CDMA2000 BTS Analyzer Option (K82) R&S FSL
1300.2519.12 6.610 E-11
C
haracteristics
RST value: CDPower
SCPI: device-specific
M
ode
CDMA
CONFigure:CDPower:CTABle:RESTore
This command restores the predefined channel tables to their factory–set values. In this way,
you can undo unintentional overwriting.
This command is an event and therefore has no *RST value and no query.
Example
INST:SEL BC2K
Activates the CDMA2000 BTS Analyzer option.
CONF:CDP:CTAB:REST
Restores the channel table.
Characteristics
RST value: -
SCPI: device-specific
Mode
CDMA
To Next Page
Loading...
