CALCulate:MARKer Subsystem (WLAN, K91 / K91n) R&S FSL
1300.2519.12 6.692 E-11
Characteristics
RST value: –
SCPI: device–specific
Mode
WLAN
CALCulate<1|2>:MARKer<1>:BSYMbol
This command positions the selected marker to the indicated symbol in the indicated burst. The
first numeric value is the burst number and the second numeric value is the symbol number.
This command only applies to 802.11b standard for the following result displays:
– Constellation vs Symbol
– EVM vs Symbol
This command is a query only and thus has no *RST value.
Parameter
<numeric_value>,<numeric_value>
Example
CALC:MARK1:BSYM 2,10
Positions marker 1 to symbol 10 of burst 2.
CALC:MARK1:BSYM?
Outputs the burst and symbol values of marker 1.
Characteristics
*RST value: –
SCPI: device–specific
Mode
WLAN
CALCulate<1|2>:MARKer<1>:CARRier
This command positions the selected marker to the indicated carrier.
This command is query only for the following result displays:
– Constellation vs Symbol
– Constellation vs Carrier
Parameter
<numeric_value>
Example
CALC:MARK:CARR –7
Positions marker 1 to carrier –7.
CALC:MARK:CARR?
Outputs the carrier value of marker 1.
Characteristics
*RST value: –
SCPI: device–specific
Mode
WLAN
To Next Page
Loading...
