Rohde & Schwarz R&S FSL3 - Page 1456

R&S FSL CALCulate:MARKer Subsystem (WLAN, K91 / K91n)
1300.2519.12 6.697 E-11
C
haracteristics
*RST value: –
SCPI: device–specific
M
ode
WLAN
CALCulate<1|2>:MARKer<1>:FUNCtion:ZOOM
This command sets the magnification factor for the zoom. It is only available for the following
result displays:
– Constellation vs Carrier
– Constellation vs Symbol
– PVT
– Magnitude Capture Buffer
Parameter
<numeric_value>
Example
INIT:CONT OFF
Switches to single sweep mode
CALC:MARK:FUNC:ZOOM 3;*WAI
Activates zooming and waits for its end.
Characteristics
*RST value: –
SCPI: device–specific
Mode
WLAN