R&S FSL FETCh Subsystem (WLAN, K91 / K91n)
1300.2519.12 6.719 E-11
F
ETCh:BURSt:QUADoffset:AVERage? / FETCh:BURSt:QUADoffset:MAXimum? /
FETCh:BURSt:QUADoffset:MINimum?
This command returns the accuracy in terms of the phase error of symbols within a burst.???
This command is a query only and thus has no *RST value.
Example
FETC:BURS:QUAD:MAX?
The maximum angle error recorded for a symbol during the measurement.
Characteristics
*RST value: –
SCPI: device–specific
Mode
WLAN
FETCh:BURSt:RMS[:AVERage?] / FETCh:BURSt:RMS:MAXimum? /
FETCh:BURSt:RMS:MINimum?
This command returns the average, minimum or maximum RMS burst power in dBm measured
during the measurement.]
This command is a query only and thus has no *RST value.
Example
FETC:BURS:RMS:MAX?
The maximum calculated RSM burst power from the most recent measurement is returned.
Characteristics
*RST value: –
SCPI: device–specific
Mode
WLAN
FETCh:BURSt:SYMBolerror:AVERage? / FETCh:BURSt:SYMBolerror:MAXimum? /
FETCh:BURSt:SYMBolerror:MINimum?
This command returns the percentage of symbols that were outside permissible de–modulation
range within a burst.???
Example
FETC:BURS:SYMB:MAX?
The maximum number of symbols that were out of range per burst.
Characteristics
*RST value: –
SCPI: device–specific
Mode
WLAN
To Next Page
Loading...
