CALCulate:MARKer Subsystem (WiMAX, K92/K93) R&S FSL
1300.2519.12 6.776 E-11
CALC2:MARK:AOFF
Switches off all markers in the screen B window.
Characteristics
RST value: –
SCPI: device–specific
Mode
OFDM, OFDMA/WiBro
CALCulate<1|2>:MARKer<1>:BURSt
This command positions the selected marker in the specified measurement window to the
indicated burst. This command is only available for the Constellation vs Symbol result display.
Parameter
1 to <number of captured bursts in capture buffer>
Example
CALC2:MARK:BURS 2
Positions marker 1 in screen B to burst 2.
CALC2:MARK:BURS?
Outputs the symbol value of marker 1 in screen B.
Characteristics
RST value: –
SCPI: device–specific
Mode
OFDM, OFDMA/WiBro
CALCulate<1|2>:MARKer<1>:CARRier
This command positions the selected marker in the specified measurement window to the
indicated carrier.
This command is only available for the following result displays:
– Constellation vs Symbol
– Constellation vs Carrier
Parameter
–100 to 100
Example
CALC2:MARK:CARR –7
Positions marker 1 in screen B to carrier –7.
CALC2:MARK:CARR?
Outputs the carrier value of marker 1 in screen B.
Characteristics
RST value: –
SCPI: device–specific
Mode
OFDM, OFDMA/WiBro
To Next Page
Loading...
