R&S FSL CALCulate:MARKer Subsystem (WiMAX, K92/K93)
1300.2519.12 6.777 E-11
CALCulate<1|2>:MARKer<1>:MAXimum[:PEAK]
This command sets the selected marker in the specified measurement window to the maximum
peak value in the current trace.
This command is only available for the following result display:
– Spectrum Flatness
This command is an event and therefore has no *RST value and no query.
Example
CALC2:MARK:MAX
Set marker 1 in screen B to maximum value in trace.
Characteristics
RST value: –
SCPI: device–specific
Mode
OFDM, OFDMA/WiBro
CALCulate<1|2>:MARKer<1>:MINimum[:PEAK]
This command sets the selected marker in the specified measurement window to the minimum
peak value in the current trace.
This command is only available for the following result display:
– Spectrum Flatness
This command is an event and therefore has no *RST value and no query.
Example
CALC2:MARK:MIN
Set marker 1 in screen B to minimum value in trace.
Characteristics
RST value: –
SCPI: device–specific
Mode
OFDM, OFDMA/WiBro
CALCulate<1|2>:MARKer<1>:SYMBol
This command positions the selected marker in the specified measurement window to the
indicated symbol.
This command is only available for the following result displays:
– Constellation vs Symbol
– Constellation vs Carrier
Parameter
1 to <number of symbols in selected burst>
To Next Page
Loading...
