Setting Traces – TRACE Key R&S FSL
1300.2519.12 4.46 E-11
Detector Positive Peak
Selects the Positive Peak detector. For details see "Detector overview" on page 4.42.
This softkey is available from firmware version 1.80.
Remote: DET POS
Detector Negative Peak
Selects the Negative Peak detector. For details see "Detector overview" on page 4.42.
This softkey is available from firmware version 1.80.
Remote: DET NEG
Detector Sample
Selects the Sample detector. For details see "Detector overview" on page 4.42.
This softkey is available from firmware version 1.80.
Remote: DET SAMP
Detector RMS
Selects the RMS detector. For details see "Detector overview" on page 4.42.
This softkey is available from firmware version 1.80.
Remote: DET RMS
Detector Average
Selects the Average detector. For details see "Detector overview" on page 4.42.
This softkey is available from firmware version 1.80.
Remote: DET AVER
Detector Quasi Peak
Selects the Quasi Peak detector. For details see "Detector overview" on page 4.42.
This softkey is available from firmware version 1.80.
Remote: DET QPE
To Next Page
Loading...
