Cable TV Measurements (Option K20) R&S FSL
1300.2519.12 4.244 E-11
Remote: SET:TV:STAN DK (TV Standard)
Remote: SOURce:DM:FORM QAM128 (Constellation)
Remote: DDEM:SRAT 1000000 (Symbol Rate)
Remote: DDEM:FILT:ALPH R018 (Roll–Off)
Remote: DDEM:SBAN NORM (Sideband Position)
Remote: DDEM:EQU OFF (Activate Equalizer)
Remote: DDEM:EQU:FRE ON (Freeze Equalizer)
Remote: DDEM:EQU:RES (Reset Equalizer)
Channel Power
Opens a submenu to measure the channel power of a digital TV signal.
For further information refer to "Channel Power – digital TV" on page 4.221.
APD
Opens a submenu to measure the amplitude probability density function (APD) of a digital TV
signal sampled in the complex base band.
For further information refer to "APD – digital TV" on page 4.221.
Remote: CONF:DTV:MEAS APD
Remote: TRAC? TRACE1
Scaling
For details refer to the Scaling softkey in the power measurement menu of the base unit.
x–Axis Signal Lvl
For details refer to the x–Axis Ref Level softkey in the power measurement menu of the base
unit.
x–Axis Range
For details refer to the x–Axis Range softkey in the power measurement menu of the base unit.
y–Axis Max Value
For details refer to the y–Axis Max Value softkey in the power measurement menu of the base
unit.
y–Axis Min Value
For details refer to the y–Axis Min Value softkey in the power measurement menu of the base
unit.
To Next Page
Loading...
