Cable TV Measurements (Option K20) R&S FSL
1300.2519.12 4.246 E-11
T
ilt Setup
Opens the Tilt Setup dialog box to define a filter for the Tilt measurement. The following
parameters can be defined for the measurement:
Span
full span or a limited frequency range
Modulation Standards
channels with certain modulation standards (select one or
several) or no restriction (select all)
Remote: FREQ:SPAN:FULL, FREQ:STAR 20MHz, FREQ:STOP 2000MHz (Span)
Remote: TV:TILT:MST:CDIS 'Analog TV', TV:TILT:MST:CEN 'Analog TV' (Modulation
Standards)
Auto Range
Automatically adjusts the x– and y–axis once. Alternatively the range of the y–axis can be
changed via the Range Log softkey or the Range Linear softkey in the amplitude menu of the
base unit.
Remote: DISP:TRAC:Y:AUTO ON
To Next Page
Loading...
