Noise Figure Measurements Option (K30) R&S FSL
1300.2519.12 4.270 E-11
Limit
Specifies the limits for the receive frequencies.
Remote: CALC:LIM2:LOW –30,–40,–10,–40,–30 (lower limit line)
Remote: CALC:LIM2:UPP –10,0,0,–10,–5 (upper limit line)
Exit
Exits the edit mode of a table.
Insert
Inserts a row above the currently selected row and sets the focus on the first field of the new
row.
Delete
Deletes the currently selected row. This action requires no confirmation.
Edit
Displays the Limit Line dialog box in edit mode with all data of the selected limit line. For further
details refer to the New softkey.
Enable/Disable
Enables or disables the selected limit line. Limit checking is only performed for activated limit
lines. Only one limit line of each type can be active at a given time.
Remote: CALC:LIM:STAT ON
Remote: CALC:LIM4:LOW:STAT ON
Remote: CALC:LIM4:UPP:STAT ON
Delete
Deletes the selected limit line.
Remote: CALC:LIM1:DEL
To Next Page
Loading...
