CDMA2000 BTS Analyzer (Option K82) R&S FSL
1300.2519.12 4.312 E-11
Trigger Polarity (IQ Capture Settings dialog box)
Sets the polarity of the trigger source.
Depending on the required polarity of the edge, the trigger polarity can be set to either positive
or negative. The default setting is Pos. The setting only has an effect if the trigger source is
external.
Remote: TRIG:SLOP POS
Remote: SWE:EGAT:POL POS
Trigger Offset (IQ Capture Settings dialog box)
For details refer to the Trigger Offset softkey in the trigger menu of the base unit.
Demod Settings
Opens the Demodulation Settings dialog box:
In the Demodulation Settings dialog box, the following parameters can be modified:
Base SF
Antenna Diversity
Multi Carrier
Time/Phase Estimation
PN Offset
Base SF (Demod Settings dialog box)
Specifies the base spreading factor. If the base spreading factor of 64 is used for channels of
spreading factor 128 (code class 7), an alias power is displayed in the Code Domain Power and
Code Domain Error Power diagrams.
Remote: CDP:SFAC 64
To Next Page
Loading...
