1xEV-DO BTS Analyzer (Option K84) R&S FSL
1300.2519.12 4.358 E-11
Parameter Setting
Digital standard 1xEV-DO, Revision 0
Sweep Continuous
Channel table Auto Search
Trigger source Free Run
Trigger offset 0 s
PN offset 0 chips
Inactive channel threshold -40 dB
Channel type PILOT
Code number 0
Slot 0
Capture length 3 slots
In order to provide a quick swap from the base unit to the 1xEV-DO BTS Analyzer option, some
parameters are passed on.
Transferred
parameter
Reference level
Ref Level Offset
Attenuation
Center Frequency
Frequency offset
Signal Channel Power
The Power measurement analyses the RF signal power of a single channel with 1.2288 MHz
bandwidth over a single trace. The displayed results are based on the root mean square.
The configuration is according to the 1xEV-DO0 requirements.
Beneath the measurement screen the bandwidth and the associated channel power are displayed.
The other screen elements match that of the screen of the Spectrum Analyzer mode.
The default settings are in accordance with the 3GPP2 specifications.
Setting Default value
Frequency Span 2 MHz
ACP Standard 1xEV-DO0 MC1
Number of adjacent channels 0
Adjacent Channel Power On
To Next Page
Loading...
