1xEV-DO BTS Analyzer (Option K84) R&S FSL
1300.2519.12 4.362 E-11
P
ower vs Time
The Power vs Time measurement examines a specified number of half slots. Up to 36 half slots can
be captured and processed simultaneously. That means that for a standard measurement of 100
half slots only three data captures are necessary. After the capturing of the data theR&S FSL
averages the measured values and compares the results to the emission envelope mask. You can
define the emission envelope mask in the corresponding submenu.
Setting Default value
Frequency Span 0 (Zero Span)
Sweep Time 833.38 Ms
RBW 3 MHz
VBW 10 MHz
Detector RMS
Trace Mode Average
In order to provide a quick swap from the base unit to the 1xEV-DO0 BTS Analyzer option, some
parameters are passed on.
Transferred Parameter
Reference Level
Ref Level Offset
Center Frequency
Frequency Offset
Trigger settings
For details on the softkeys of the Power vs Time measurement see Power vs Time in the
measurement menu.
To Next Page
Loading...
