R&S FSL 1xEV-DO BTS Analyzer (Option K84)
1300.2519.12 4.379 E-11
Normalize
Eliminates the DC offset from the signal.
The default setting of the parameter is OFF.
Remote: CDP:NORM OFF
Screen Focus A/B
Sets the focus on the selected screen. Changes apply only to the focused screen. There are no
restrictions to the display of measurement results, i.e. you can display every result display in
either or both screens.
Remote: DISP:WIND1:SSEL
Screen Size Split/Full
Displays the result display in full screen size, or splits the screen to display two result displays.
To change settings in split screen display, set the focus on the designated result display via the
Screen Focus A/B softkey.
Remote: DISP:FORM SING
Select Meas
Opens a dialog box to select one of the measurements and result displays of the Code Domain
Analyzer:
– Code Domain Power
– General Results
– Channel Results
– Power vs Chip
– Power vs Symbol
– Composite EVM
– Channel Table
– Bitstream
– Peak Code Domain Error
– Code Domain Error
– Symbol Constellation
– EVM vs Symbol
– Composite Constellation
For details on screen layout and default settings refer to the measurement description of the
Measurements and result display.
To Next Page
Loading...
